F18 Hornet Wing Fold Switch

USD$ 70.49USD$ 84.58

This unit is a F18 Hornet Wing Fold assembly switch, to keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

This requires the ECM panels control board, please choose the option if you don’t already have it or you can’t drive these, If you have already received the ECM board, the wing fold pins may not be soldered on and you will need to be able to solder on the missing header pins. Contact me if you are not able to do this.

 

 

If you love flying the F18 Hornet, enhance the experience with a F18 Hornet Wing Fold Switch.

This unit is a functioning Wing Fold assembly, to keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

This requires the ECM panels control board, please choose the option if you don’t already have it or you can’t drive these, If you have already received the ECM board, the wing fold pins may not be soldered on and you will need to be able to solder on the missing header pins. Contact me if you are not able to do this.

You could also use this with your own controller, you just require GND and 4 input pins.

The unit is designed with clearance on mounting nut to be installed into a 3mm thick panel.

As always this is a hobby quality product and all effort is made to create a top quality product however there may be visual imperfections in the finished product.
If you have any questions or concerns please ask prior to preorder.

 

Spread the love
Quantity
Clear