F18 Hornet Right USB Control Board
This F18 Hornet Right USB Control Board is perfect for those doing their DIY pit build and want to save the time and hassle of programming all the switches.
This F18 Hornet Right USB Control Board is perfect for those doing their DIY pit build and want to save the time and hassle of programming all the switches for either DCSBIOS or Joystick functionality.
The unit comes witha Pro Micro Controller programmed for all the functionality on the board for DCSBIOS, just solder on your switches and pots and you are good to go.
The unit also has a jumper pin to allow you to switch to HID mode, this way DCSBIOS is not required.
Simple video showing the unit in action, I am simply hooking up a 2 way, 3 way toggle switch, potentiometer or a 5 pin Encoder Module. FOr the Rotary switches I am just using a jump cable to showcase.
The unit has input headers as well for future expansion, this will allow even more F18 hornet Controls to be handled by a single USB cable.
The unit is 90mm x 140mm and has the following
The controls supported on this panel are below and are clearly marked.
Wing Fold (supports Tekcreations Wingfold or you can wire up your own)
Window Defog – Analog
Window Anti Ice
All Elec Panel Controls
All Environment Panel Controls
Interior Lighting Panel Controls
Al Sensor Panel Controls
All KY58 Controls
FCS Bit switch
The 3 ways operate with an On-Off-On switch and the 2 ways a On-Off. The Potentiomers must be linear taper ie B10k.
Out of stock