fbpx
Skip to content

F18 Hornet Hook Lever Switch

This unit is a F18 Hornet Hook Lever assembly, to keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

This requires the ECM panels control board (https://tekcreations.space/product/f18-hornet-ecm-brain-controller/) (Please check the hook pins are soldered on), or you could also use this with your own controller, you just require GND and 1 input pins.

 

 

$106.50 AUD

Built to Order - Please Allow 10 – 20 days

If you love flying the F18 Hornet, enhance the experience with a F18 Hook Lever Switch.

This unit is a functioning F18 Hornet Hook Lever assembly, to keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

The unit can have the friction adjusted with an allen key,and is designed to be mounted into a pit or frame build with the bolts supplied. The handle can be removed and I will be offering different handles in the future for Different Functions, ie F14 Tomcat Hook, Landing Gear etc.

This requires the ECM panels control board (https://tekcreations.space/product/f18-hornet-ecm-brain-controller/) , or you could also use this with your own controller, you just require GND and 1 input pins.

From Base to top of Lever is 135mm, the baseplate is 45 x 90mm, with holes 30mm x 80mm apart. I can make the baseplate a bit bigger if needed just contact me.

As always this is a hobby quality product and all effort is made to create a top quality product however there may be visual imperfections in the finished product.
If you have any questions or concerns please ask prior to preorder.

 

Spread the love
Quantity