If you love flying the F18 Hornet, enhance the experience with a F18 Hook Gear Switch.

This unit is the same as the F18 Hornet Hook Lever but with a Lollipop handle and a LED in the shaft.The handle does not rotate.

To keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

The unit can have the friction adjusted with an allen key,and is designed to be mounted into a pit or frame build with the bolts supplied.

This requires the ECM panels control board (https://tekcreations.space/product/f18-hornet-ecm-brain-controller/) , or you could also use this with your own controller, you just require GND and 1 input pins.

From Base to top of Lever is 135mm, the baseplate is 45 x 90mm, with holes 30mm x 80mm apart.

As always this is a hobby quality product and all effort is made to create a top quality product however there may be visual imperfections in the finished product.
If you have any questions or concerns please ask prior to preorder.