fbpx
Skip to content

F14 Tomcat Hook Lever Switch

This unit is a F14 Tomcat Hook Lever assembly, to keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

This requires the F18 ECM panels control board, the Display Panel (Please check the hook pins are soldered on), or you could also use this with your own controller, you just require GND and 1 input pins.

 

 

$106.50 AUD

Out of stock

Email when stock available

If you love flying the F14 Tomcat , enhance the experience with a F14 Hook Lever Switch. Video below shows the Hornet Lever In action, but obviously the Tomcat has a different handle as shown in Picture.

This unit is a functioning F14 Tomcat Hook Lever assembly, to keeps costs down the unit is supplied as shown, Raw and unpainted with you doing a light fine grit sand and paint to finish the unit off.

The unit can have the friction adjusted with an allen key,and is designed to be mounted into a pit or frame build with the bolts supplied. The handle can be removed and I will be offering different handles in the future for Different Functions, ie F14 Tomcat Hook, Landing Gear etc.

This requires the ECM panels control board (Please check the hook pins are soldered on), or you could also use this with your own controller, you just require GND and 1 input pins.

From Base to top of Lever is 135mm, the baseplate is 45 x 90mm, with holes 30mm x 80mm apart.

As always this is a hobby quality product and all effort is made to create a top quality product however there may be visual imperfections in the finished product.
If you have any questions or concerns please ask prior to preorder.

 

Spread the love
Quantity