This is for the F18 Right Panel that has V2.X and higher on with a Purple controller on the back.
By default the unit comes as a HID Joystick, it can be mapped in the control setup of any game.
Please note, this may not appear in Game Controllers, but this will work perfectly fine for any game and will require mapping to be done in most games.
If you wish to switch Modes,
For HID Mode
Put the Mode/RAM Switch to MODE AUTO
Turn the Radar Rotary switch one position Left pass OFF.
Then flick the Mode Ram Switch to OFF/RAM
Return Radar Rotary to OFF
For DCSBIOS Mode
Put the Mode/RAM Switch to OFF/RAM
Turn the Radar Rotary switch one position Left pass OFF.
Then flick the Mode Ram Switch to MODE AUTO
Return Radar Rotary to OFF
Please note in both modes the Bleed Air Encoder doesn’t know “where it is” on startup, so you need to ensure it is in the correct position before loading into the cockpit.
The Backlit Brightness is controlled by the Consoles Potentiometer.
There are extra inputs on the board, they are disable by default to stop ghosting, if you wish to enable these for your pit builds please contact me with what you want turned on for custom firmware.